2018 December 17: Brakes, spokes, old header pipes, etc. (3.00 hours)
Updated:
First entry|Previous entry|Next entry|Last entry
- Fit the brake plates to the wheels and made sure the braking material did not rub on the drum.
- Torqued all spoke nipples and ground down any spoke threads that protrued through too far.
- Fit old header pipes so that the new ones don't get discolored during initial start up and tuning.
- Fit shock mounts to frame, swing arm, and rear drive.
- Fit rear drive level, fill and drain plugs.
First entry|Previous entry|Next entry|Last entry