2009 February 10: Miscellaneous cleaning and assembly (3.50 hours)

Updated: 2009 February 10

Used a wire wheel to remove the existing paint off of the oil cooler and the oil tank.
Primed and painted the oil cooler and oil tank.
Zinc plated both the special fasteners that secure the bottom of the side covers in place.
Mounted the right side bottom side cover fastener.
Mounted the right side fuse panel bracket, complete with wire retaining clips and fuse holders.
Cleaned up the existing wiring loom and associated components. Removed the add-on harness for the Pacifico Fairing.
Cleaned up the dash, inside and out.
Removed the anodized finish from the left side clutch assembly. The original finish was half missing and I wanted a uniform finish.
Lubricated the speedometer cable.